PRODUCT DETAIL
MD788/788G
MD788/788G
User-centered Design The large-size color display allows good visibility even under extremely strong light. And the seven programmable keys facilitate your communication in various conditions.
Superior Voice With the combined application of narrowband codec and digital errorcorrection technologies, MD78X/78XG mobile radio is capable of ensuring you superior voice under noisy environments or at the edge of the coverage area.
Versatile Services In addition to conventional communication services, MD78X/78XG mobile radio features rich data services and selectable functions such as Text Message, Scan, Emergency, Channel Steering.
- User-centered Design
- Reliable Quality
- Superior Voice
- Higher Spectrum Efficiency, Higher Channel Capacity
- Dual-slot Pseudo Trunk
- Secure Communication
- Versatile Services
- Further Development Port
- Option Board Interface
GENERAL |
||
Frequencies |
UHF1: 400-470MHz
UHF2: 450-520MHz
UHF3: 350-400MHz
UHF5: 806-941MHz
VHF: 136-174MHz
|
|
Channel Capacity |
1024 |
|
Zone Capacity |
64 (each with a maximum of 16 channels) |
|
Channel Spacing |
12.5KHz / 20KHz / 25KHz* |
|
Operating Voltage |
13.6 V ±15% |
|
Current Drain |
Standby - < 0.6A
Receive - < 2.0A
|
|
Frequency Stability | ±1.5ppm |
|
Antenna Impedance | 50Ω |
|
Dimensions (H×W×D) | 60×174×200 mm |
|
Weight (with antenna & standard battery) | 1.7Kg |
|
LCD Display | 220×176 pixels, 262000 colors 2.0 inch, 4 rows |
|
TRANSMITTER | ||
RF Power Output | LOW POWER :- UHF1/UHF2/UHF3: 5-25W; VHF: 5-25W HIGH POWER:- UHF1/UHF2/UHF3: 5-45W; UHF5: 5-35W; VHF: 5-50W
|
|
FM Modulation | 11K0F3E @ 12.5KHz 14K0F3E @ 20KHz 16K0F3E @ <25KHz>25KHz>
|
|
4FSK Digital Modulation | 12.5KHz data only:7K60FXD 12.5KHz data & voice:7K60FXW
|
|
Conducted/Radiated Emission | -36dBm <1GHz -30dBm > 1GHz
|
|
Modulation Limiting | ±2.5KHz @ 12.5KHz ±4.0KHz @ 20KHz ±5.0KHz @ 25KHz*
|
|
FM Hum & Noise | 40dB @ 12.5KHz 43dB @ 20KHz 45dB @ 25KHz
|
|
Adjacent Channel Power | 60dB @ 12.5KHz 70dB @ 20/25KHz*
|
|
Audio Response | +1 ~ -3dB |
|
Audio Distortion | ≤3% |
|
Digital Vocoder Type | AMBE++ or SELP |
|
Digital Protocol | ETSI-TS102 361-1, -2,-3 |
|
RECEIVER | ||
Rated Audio Power Output | Internal (@20 ohm load) = 3W
External (@8 ohm load) = 7.5W
|
|
Max Audio Power Output | Internal (@20 ohm load) = 8W
External (@8 ohm load) = 20W
|
|
Rated Audio Distortion | ≤3% |
|
Audio Response | +1 ~ -3dB |
|
Conducted Spurious Emission | < -57dBm |
|
ENVIRONMENTAL SPECIFICATION | ||
ESD | IEC 61000-4-2 (level 4) ±8kV (contact) ±15kV (air)
|
|
American Military Standard | MIL-STD-810 C/D/E/F/G |
|
Dust & Water Intrusion | IP67 Standard |
|
Humidity | Per MIL-STD-810 C/D/E/F/G Standard |
|
Shock & Vibration | Per MIL-STD-810 C/D/E/F/G Standard |